Brake Fluid Tester 5 LED CAR Vehicle Automotive Testing Tool for DOT3 / DOT4 Car Fluid Tester Vehicle Tools ELM327-Black

Rate this product!

Tk. 900 *, Product ID: 55602
*Warrenty : 1 year
*Last Updated On : 2 months ago

01818269935 //01772332000
Seller:

IP Surveillance System BD

Location: Elephant-Road-Dhaka

Address: ECOM INTERNATIONAL,7/20A 8/47 Eastern Plaza, lifter 7 Hatirpu, Dhaka 1205

Description

Brake Fluid Tester 5 LED CAR Vehicle Automotive Testing Tool for DOT3 / DOT4 Car Fluid Tester Vehicle Tools ELM327-Black

  • DOT4 brake fluid goes bad is because of the moisture content increase, so the 5 LED indicators will show the percentage of water in the brake fluid, help you to konw the time of the brake fluid replacement
  • Operated by a LR03 AAA 1.5V battery ( Battery Not Included), put the probe into the brake fluid and read the result, accroding to the LED light konw the moisture content
  • Automatically power off, the tester will automatically power off after 12 seconds of inactivity
  • To check the quality of brake fluid quality, quickly and easily test moisture content in the brake fluid
  • The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality.Developed for professional use in astomotive repair shops and in servicing

100% good quality brake fluid tester 5 automotive LED car vehicle testing tools for DOT3 / DOT4 car fluid tester tools

 OBFLOBFT-A_0002_3OBFT-A_0004_4OBFT-D-3OBFT-A_0005_7-1000

 

 

 

5 LED brake fluid tester CAR automotive vehicle testing tool

 

 

Product to:

The brake fluid tester is suitable for determining the quality of the brake fluid.

The brake fluid tester adjusts to the variation of the electrical conductivity to determine the moisture content of the brake fluid change. through the light-emitting diodes it clearly shows the degree of humidity. The high moisture content reduces the boiling point and then affects the braking performance. The red indicates that the brake fluid should be replaced immediately, the green indicates that the brake fluid is in good condition, the yellow indicates that the brake fluid remains well, but will change.

Designed without a cable connector

Fast and convevient

Power supply: 1.5 V "AAA" x 1

Suitable for DOT3 / DOT4 tests

 

Instructions for use:

5 LEDs indicating the% water in the brake fluid:

0% LED: there is water content in the brake fluid

1% LED: water content, or 1%, the brake fluid is above the standard

2% LED: water content, h2o 2%, can still be used

3% LED: water content, h2o 3%, the brake fluid must be changed

4% LED: water content, h2o 4%, the brake fluid must be changed

 

Note: After each test, you should clean the test head with dry cloth or paper.

PS: pay attention to the following words

Due to the cause of international air transportation, we will not provide the battery.

Thank you,

 

 

The package includes 1 brake fluid tester

Do you want to sell something ?

Post that on bdstore24.com!

Post Your Product